Hot Racing steel helical spiral 12% overdrive 36T/14T gear set for 1/10 Axial AX10, EXO, RR10 Bomber, SCX10, SMT10, Wraith, and Yeti.
FEATURES:
- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears - High carbon steel construction - Stronger than the stock bevel-cut zinc cast gears - 36T/14T provides 12% overdrive (vs stock 38T/13T) increases the wheel speed and is commonly used in the front end for digs - Works on front or rear. Use cases are typically front and rear at the same time, or front only to increase front digs
YOU WILL RECEIVE:
- One (1) 36 tooth spiral cut ring gear - One (1) 14 tooth spiral cut pinion gear
REQUIREMENTS:
- Installation following kit manual - One M3x2.5x11mm (Axial AXA0175 or Hot Racing SSP311) or M3x2.5x12mm (Axial AXA176) screw shaft for driveshaft attachment - Do not use the stock M3x3mm setscrew (Axial AXA180), if originally equipped. - Medium threadlock (blue threadlocking compound) if screws are threaded into metal - Hot Racing SPL10G05 high temp grease recommended
COMMENTS:
- Replaces Axial AX30392 38/13T bevel-cut zinc cast gears - Hot Racing gear set options include: SWRA9364 (36T/14T overdrive ratio), SWRA9383 (38T/13T stock ratio), SWRA9433 (43T/13T underdrive ratio) SN July 9, 2018
FEATURES:
- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears - High carbon steel construction - Stronger than the stock bevel-cut zinc cast gears - 36T/14T provides 12% overdrive (vs stock 38T/13T) increases the wheel speed and is commonly used in the front end for digs - Works on front or rear. Use cases are typically front and rear at the same time, or front only to increase front digs
YOU WILL RECEIVE:
- One (1) 36 tooth spiral cut ring gear - One (1) 14 tooth spiral cut pinion gear
REQUIREMENTS:
- Installation following kit manual - One M3x2.5x11mm (Axial AXA0175 or Hot Racing SSP311) or M3x2.5x12mm (Axial AXA176) screw shaft for driveshaft attachment - Do not use the stock M3x3mm setscrew (Axial AXA180), if originally equipped. - Medium threadlock (blue threadlocking compound) if screws are threaded into metal - Hot Racing SPL10G05 high temp grease recommended
COMMENTS:
- Replaces Axial AX30392 38/13T bevel-cut zinc cast gears - Hot Racing gear set options include: SWRA9364 (36T/14T overdrive ratio), SWRA9383 (38T/13T stock ratio), SWRA9433 (43T/13T underdrive ratio) SN July 9, 2018
